[i tried] receiver in unity 5
Re: [i tried] receiver in unity 5
Progress has slowed a bit due to RL deadlines. But I am making progress on the procedural wall generator. Just have to get the triangle strip generation to work in the right order. Then I can generate dynamic walls / floors with cut-outs for stairs / windows etc. Unfortunately my current workload will probably halt c# programming till the end of the month . I'll keep you guys posted once I start moving again with the project
Re: [i tried] receiver in unity 5
A little update on procedural generation progress:
- Procedural cutting of mesh walls can now overlap and auto generates the needed slices for all holes.
- there can be negative offsets allowing for holes to pass over the mesh boundary for areas like doors that go all the way to the floor.
A quick video of the procedural cutting taking place. Added in random holes with random dimensions and offsets. All works ok. Nothing breaks.
https://www.youtube.com/watch?v=4b5AJX9M5Ds
- Procedural cutting of mesh walls can now overlap and auto generates the needed slices for all holes.
- there can be negative offsets allowing for holes to pass over the mesh boundary for areas like doors that go all the way to the floor.
A quick video of the procedural cutting taking place. Added in random holes with random dimensions and offsets. All works ok. Nothing breaks.
https://www.youtube.com/watch?v=4b5AJX9M5Ds
Re: [i tried] receiver in unity 5
How far away do you think this is from release?
Re: [i tried] receiver in unity 5
It's a bit hard to say at the moment. My day job is eating up most of my time. Once I get past my deadline there should be more frequent updates similar to the first April ones.
Current pending tasks:
- add thickness to the walls and write a function to calculate the uvs for the walls (rather complex)
- implement a room grid system to manage the room spawn positions and to check where the doors are connected
- implement portal system to random rooms
- finish tape player mechanics
- furniture / random light spawns (will probably remodel furniture to allow draw / door opening )
- patrol paths for mobile turrets that take into account room connection
Current pending tasks:
- add thickness to the walls and write a function to calculate the uvs for the walls (rather complex)
- implement a room grid system to manage the room spawn positions and to check where the doors are connected
- implement portal system to random rooms
- finish tape player mechanics
- furniture / random light spawns (will probably remodel furniture to allow draw / door opening )
- patrol paths for mobile turrets that take into account room connection
Re: [i tried] receiver in unity 5
Main level grid prototype is working now it just needs refinements
https://3draven.wordpress.com/2016/02/2 ... prototype/
https://3draven.wordpress.com/2016/02/2 ... prototype/
-
- Posts: 1451
- Joined: Sun Oct 26, 2008 8:24 pm
- Location: Sweden
- Contact:
Re: [i tried] receiver in unity 5
Really cool work, 3draven!
Re: [i tried] receiver in unity 5
So I've decided to push the procedural elements to a personal project an release receiver as is. I just need to implement the tape player mechanics & do some small bug hunts. Further development will go into a personal project.
Re: [i tried] receiver in unity 5
- Adding in key bindings that will reflect in the in-game help.
- Made more optimizations to the robot scripts.
- Around 60% of the new inventory class is up and running (stripping it out of the aimscript.cs)
- Made more optimizations to the robot scripts.
- Around 60% of the new inventory class is up and running (stripping it out of the aimscript.cs)
Re: [i tried] receiver in unity 5
Some slight updates
Wall generator slowly being implemented into the level generator (still only 1 side)
https://3draven.wordpress.com/2016/03/0 ... rogress-2/
Procedural box collider generation based on holes
https://3draven.wordpress.com/2016/03/0 ... eneration/
Wall generator slowly being implemented into the level generator (still only 1 side)
https://3draven.wordpress.com/2016/03/0 ... rogress-2/
Procedural box collider generation based on holes
https://3draven.wordpress.com/2016/03/0 ... eneration/
Re: [i tried] receiver in unity 5
Window instancing now auto cuts out holes and generates box colliders!
https://3draven.wordpress.com/2016/03/0 ... -update-p/
https://3draven.wordpress.com/2016/03/0 ... -update-p/
Re: [i tried] receiver in unity 5
Not much downtime today so I did some modeling to relax a bit. Remade the kitchen models. Doors can now open. Will hook it up to physx later on.
https://3draven.wordpress.com/2016/03/0 ... t-for-fun/
https://3draven.wordpress.com/2016/03/0 ... t-for-fun/
Re: [i tried] receiver in unity 5
https://3draven.wordpress.com/2016/03/08/floor-it/
Floors with holes implemented. Now they still need to "talk" with other floors to know where the stairs are. Procedural mesh still needs
- auto UV mapping (I have to cast the models vertex space from world space to a normalized 0,1 texture space
- extra geometry for the other side of the mesh and edges of the the holes.
Re: [i tried] receiver in unity 5
Ok a big step forward! Got double sided procedural geometry working. Now I just have to fill in the area between the two sheets of polygons.
https://3draven.wordpress.com/2016/03/0 ... -proc-gen/
UV mapping still to go but that can wait. I'll be focusing on inventory bug fixes and level gen mechanics. Finally back to the fun parts!.
https://3draven.wordpress.com/2016/03/0 ... -proc-gen/
UV mapping still to go but that can wait. I'll be focusing on inventory bug fixes and level gen mechanics. Finally back to the fun parts!.
-
- Posts: 42
- Joined: Fri Feb 26, 2010 7:53 pm
- Location: Eielson AFB, Alaska
- Contact:
Re: [i tried] receiver in unity 5
Hey everyone! Is this still being ported over to Unity 5?
I wanted to poke around and add Oculus Touch / Vive support.
I wanted to poke around and add Oculus Touch / Vive support.